Pressure Sewer Systems

H2H Plumbing is one of Australia’s most experienced design and construct companies of Pressure Sewer Systems.

What is a Pressure Sewer System?

A pressure sewer system consists of a series of positive displacement grinder pumps moving finely ground effluent material along a network of small diameter polyethylene pipes.

Each dwelling within the system has a below ground pump station. The wastewater is delivered to the station by traditional gravity methods; this is then ground into a fine slurry and pumped under a low pressure through a network of polyethylene pipes. The piping network can extend for many thousands of metres at a total dynamic head of 60 metres.

1.

Pressure Sewer Design

Through our experienced design team we are able to undertake the following design work:

2.

Supply of Pressure Sewer Equipment

The Pressure Sewer market has grown in Australia over the past 20 years and there are now multiple suppliers of Pressure Sewer equipment.

Where we sit with our clients is to work through the different options available and collectively agree upon the best solution that suits the needs of the project.

3.

Construction of Pressure Sewer Systems

H2H Plumbing is one of the country’s most experienced installers of Pressure Sewer equipment. 

Due to our vast experience in installing these systems, we can offer our clients certainty that the system installed will be trouble-free for years to come. Data from our previous projects support this statement with less than 1% infancy failures and no Infiltration or Inflow from stormwater.

4.

Maintenance of Pressure Sewer Systems

H2H Plumbing assists its clients with maintaining Pressure Sewer Systems in the following areas:

H2H Plumbing's Pressure Sewer System Projects

Our safety commitment

H2H Plumbing is committed to ensuring all work is carried out safely, and with all possible measures taken to remove and reduce health, safety and welfare risks.

Management is firmly committed to a policy enabling all work activities to be carried out safely, and with all possible measures taken to remove (or at least reduce) risks to the health, safety and welfare of workers, contractors, authorised visitors, and anyone else who may be affected by our operations.

We are committed to ensuring we comply with the Work Health and Safety Act 2012, the Work Health and Safety Regulations 2012 and applicable Codes of Practice and Australian Standards as far as possible.

Management will provide and maintain as far as possible:

  • a safe working environment
  • safe systems of work
  • plant and substances in safe condition
  • facilities for the welfare of workers
  • information, instruction, training and supervision that is reasonably necessary to ensure that each worker is safe from injury and risks to health
  • a commitment to consult and co-operate with workers in all matters relating to health and safety in the workplace
  • a commitment to continually improve our performance through effective safety management.

 

Workers have an obligation to:

  • comply with safe work practices, with the intent of avoiding injury to themselves and others and damage to plant and equipment
  • take reasonable care of the health and safety of themselves and others
  • wear personal protective equipment and clothing where necessary
  • comply with any direction given by management for health and safety
  • not misuse or interfere with anything provided for health and safety
  • report all accidents and incidents on the job immediately, no matter how trivial
  • report all known or observed hazards to their supervisor or manager.

We seek the co-operation of all workers, customers, visitors and other persons. We encourage suggestions for improving our health and safety objectives to create a safer working environment with a zero accident rate.

This policy applies to all business operations and functions.

We provide under road boring through the use of horizontal directional boring machines for various pipelines and utilities.

Our team undertakes the design and installation of water and sewer infrastructure and pipelines.

We provide plumbing and gasfitting repairs, maintenance and installations services.