Under Road Boring

H2H Plumbing provides under road boring through the use of horizontal directional boring machines for various pipelines and utilities

What is Horizontal Directional Boring?

Directional boring is a minimal impact trenchless method of installing underground utilities. Utilities such as pipe, conduit and cables are bored in a shallow arc underground, using surface drilling equipment. 

Boring instead of traditional cut and cover pipelines offer significant environmental advantages and minimises disturbances, such as closing roads. Horizontal directional boring also allows greater flexibility compared to conventional trenching. 

Directional Boring/HDD is generally accomplished in three principal phases.

1. A small pilot hole is drilled.

2. The bore created by the pilot hole is drilled to expand to the size needed for pipeline or utilities.

3. The pipeline is pulled into the bored hole, creating an uninterrupted pipe exposed only at the endpoints.

Avoid surface obstacles such as roadways, railroads, wetlands and bodies of water with Horizontal Directional Boring:

The process is suitable for a variety of soil conditions including clay, silt, sand, and rock. Problematic soil conditions include large grain content in the form of coarse gravel, cobbles, and boulders. 

H2H Plumbing provides various boring services using a range of equipment. 

We provide:

H2H Plumbing's Under Road Boring Projects

Our safety commitment

H2H Plumbing is committed to ensuring all work is carried out safely, and with all possible measures taken to remove and reduce health, safety and welfare risks.

Management is firmly committed to a policy enabling all work activities to be carried out safely, and with all possible measures taken to remove (or at least reduce) risks to the health, safety and welfare of workers, contractors, authorised visitors, and anyone else who may be affected by our operations.

We are committed to ensuring we comply with the Work Health and Safety Act 2012, the Work Health and Safety Regulations 2012 and applicable Codes of Practice and Australian Standards as far as possible.

Management will provide and maintain as far as possible:

  • a safe working environment
  • safe systems of work
  • plant and substances in safe condition
  • facilities for the welfare of workers
  • information, instruction, training and supervision that is reasonably necessary to ensure that each worker is safe from injury and risks to health
  • a commitment to consult and co-operate with workers in all matters relating to health and safety in the workplace
  • a commitment to continually improve our performance through effective safety management.

 

Workers have an obligation to:

  • comply with safe work practices, with the intent of avoiding injury to themselves and others and damage to plant and equipment
  • take reasonable care of the health and safety of themselves and others
  • wear personal protective equipment and clothing where necessary
  • comply with any direction given by management for health and safety
  • not misuse or interfere with anything provided for health and safety
  • report all accidents and incidents on the job immediately, no matter how trivial
  • report all known or observed hazards to their supervisor or manager.

We seek the co-operation of all workers, customers, visitors and other persons. We encourage suggestions for improving our health and safety objectives to create a safer working environment with a zero accident rate.

This policy applies to all business operations and functions.

We’re one of Australia’s most experienced design and construct companies of Pressure Sewer Systems. 

Our team undertakes the design and installation of water and sewer infrastructure and pipelines.

We provide plumbing and gasfitting repairs, maintenance and installations services.